mpm-part-number-manager/references/MPM_SKU_System_Reference.md

MPM Part Number & SKU System Reference

Version: 1.4 Last Updated: 2026-05-22 Maintained by: Bryan Gilliom, Message Point Media

---

Purpose

This document is the authoritative reference for MPM's part numbering and SKU system. It is intended to orient Claude CoWork sessions, power the Display Catalog Skill, and serve as the source of truth for anyone assigning, decoding, or validating part numbers across all product categories.

---

Global Rules

These rules apply to every part number in the system without exception:

1. Unique ID is always last — The sequential Unique ID must be the final element in the part number, except when a /Color suffix is present.
2. Color suffix always trails the Unique ID — When a /Color label is included, it is literally appended after the Unique ID: ...-[UniqueID]/[Color].
3. One sequential ID pool per prefix — All sub-types within a prefix (e.g., all MNT- variants) share a single incrementing counter. Sub-types do not have separate pools. KIT items inherit the ID pool of their child prefix (e.g., KIT-FAB- uses FAxxxx).
4. Starting ID for new series — All series begin at x0501 to avoid conflicts with previously assigned numbers that may lack documentation.
5. Delimiters — Hyphens (-) separate segments. No spaces. Color suffix uses a forward slash (/).
6. Optional elements — Elements marked Optional are omitted entirely (not left blank) when not applicable.
7. Client-specific suffix — When a part is dimensionally or functionally specific to a particular customer and/or product sub-variant, insert a [CustomerCode]/[Variant] segment immediately before the UniqueID. CustomerCode is the 4-letter customer designator (e.g., COMT for Community Transit). Variant is an optional sub-model identifier (e.g., TCK for TC-Kiosk). The / here is a separator within the suffix and is distinct from the /Color color suffix. Example: FAB-ENC-PRT-DR-EX43v-COMT/TCK-FA0508.

---

Color Suffix Codes

Used for physical labeling/color identification on hardware. Appended as /CODE after the Unique ID.

Code	Color
/BLK	Black
/DGR	Dark Gray
/GRY	Gray
/SIL	Silver
/POL	Polished Stainless Steel
/YLW	Yellow

Note: Earlier sheet versions showed /BK for MNT items — the correct code is /BLK across all prefixes.

---

Sequential ID Pools by Prefix

Prefix	ID Pool	First Available
MNT-	MAxxxx	MA0501
CBL-	CAxxxx	CA0501
PKG-	SAxxxx	SA0501
ACC-	AAxxxx	AA0501
PRT-	PAxxxx	PA0501
FAB-	FAxxxx	FA0501
FST-	TAxxxx	TA0501

MPTV-, MP-, and KIT- are not assigned IDs of their own. KIT- inherits the ID pool of its child prefix.

---

KIT- — Kitted Assemblies

KIT- is a prefix modifier, not a standalone prefix. It is always placed before the most descriptive child prefix and indicates the item is a kit containing multiple independent parts.

Pattern:

KIT-[ChildPrefix]-[inherited child path until tree no longer applies]-[ChildUniqueID]

The part number follows the child prefix grammar exactly for as far as the tree applies, then terminates with the child's UniqueID. The child's ID pool is used.

Valid forms:

• KIT-MNT-... (uses MAxxxx)
• KIT-FAB-... (uses FAxxxx)
• KIT-ACC-... (uses AAxxxx)
• KIT-PRT-... (uses PAxxxx)

Examples:

• KIT-FAB-LM-P2.5-5x2DS-FA0505 — LED modular frame kit, P2.5 pitch, 5-column × 2-row dual sided
• KIT-PRT-SEN-EX43v-PA0510 — Sensor kit for EX43v display

---

Prefix Reference

---

MPTV- — Finished Displays

No Unique ID. Fully descriptive.

Pattern:

MPTV-[Family][Size][Flags]-[Generation or Customer]/[Color]

Segments:

Segment	Description	Examples
Family	Display product line	EX, EXD, M, MR, LM, LC, IX
Size	Diagonal size (integer)	24, 29, 43, 55
Flags	Feature flags, appended directly to size (no hyphen)	sw, k, v, t, s
Generation / Customer	Optional hyphenated suffix	-Gen5, -CM (CapMetro), -COMT (Community Transit)
/Color	Optional label color	/BLK, /DGR, /SIL, /POL

Note on EXD: The D in EXD is a marketing designation ("Designer") and is not used as a descriptor in part numbers for components. Use the functional family + size + flags instead (e.g., EX43v for an EXD43k vertical 43" panel).

Examples:

• MPTV-M29sw — M-Series 29" slimwide
• MPTV-EX55-Gen5 — Extreme 55", Generation 5
• MPTV-MR29sws-CM/BLK — Rail 29" slimwide with speaker, CapMetro custom, black
• MPTV-EX43v-COMT — EX 43" vertical, Community Transit custom

---

MP- — Controllers

No Unique ID. Fully descriptive.

Pattern:

MP-[Family][TypeSuffix]-[Generation or Customer]

Segments:

Segment	Description	Examples
Family	Controller product family	140, 185, 190, 200, 205, 210
TypeSuffix	Appended directly to family number	P (Pro), M, R, L (LED)
Generation / Customer	Optional hyphenated suffix	-G1, -Gen5, -CM, -COMT

Examples:

• MP-190P — 190-series Pro
• MP-185P-G1 — 185-series Pro, Generation 1
• MP-140L — 140-series LED controller
• MP-210M-Gen5 — 210-series M type, Generation 5

---

MNT- — Mounts

ID Pool: MAxxxx starting at MA0501

Five distinct sub-patterns based on usage and type:

Indoor / Outdoor Standalone

MNT-[I or EX]-[UniqueID]/[Color]

Example: MNT-EX-MA0501/BLK

Indoor / Outdoor Kit (with display model)

MNT-[I or EX]-KIT-[DisplayModel]-[UniqueID]/[Color]

Example: MNT-I-KIT-37SWD-MA0502/SIL

Mobile Component

MNT-M-[TypeSuffix]-[UniqueID]/[Color]

TypeSuffix	Meaning
BRK	Bracket
CLM	Clamp
FIT	Fitting
HR	Hardware

Example: MNT-M-BRK-MA0503/BLK

Mobile Kit (with display model)

MNT-M-KIT-[DisplayModel]-[UniqueID]/[Color]

Example: MNT-M-KIT-29SW-MA0504/DGR

Solar / Low Power Kit

MNT-LP-KIT-[DisplayModel (Optional)]-[UniqueID]

Example: MNT-LP-KIT-MA0505 or MNT-LP-KIT-29SW-MA0506

---

CBL- — Cables

ID Pool: CAxxxx starting at CA0501

Pattern:

CBL-[Type]-[Length]-[UniqueID]/[Color]

Type Codes:

Code	Meaning
Vid	Video
Pwr	Power
Net	Network
Sig	Signal
Aud	Audio
Com	Communications
LM	LED Module
MISC	Miscellaneous

Length Format: Value + unit — 3M, 4FT, 30CM, 12IN

Examples:

• CBL-LM-3M-CA0501 — 3-meter LED module cable
• CBL-MISC-8IN-CA0502/BLK — 8" miscellaneous cable (e.g., ground strap), black

---

PKG- — Packaging

ID Pool: SAxxxx starting at SA0501

Seven sub-patterns by physical form. No color suffix on packaging.

Box

PKG-BX[LxWxH][Unit]-[UniqueID]

Example: PKG-BX40x30x20CM-SA0501

Bag

PKG-BG[LxW][Unit]-[SealType]-[UniqueID]

SealType	Meaning
ZS	Zipper Seal
HS	Heat Seal
SS	Self Seal

Example: PKG-BG30x20CM-ZS-SA0502

Cushioning — Plank

PKG-CU-PL-[LxWxH][Unit]-[UniqueID]

Example: PKG-CU-PL-40x30x5CM-SA0503

Cushioning — Roll

PKG-CU-RL-[Width][Unit]-[Thickness][Unit]-[UniqueID]

Example: PKG-CU-RL-60CM-10MM-SA0504

Label

PKG-LBL-[SubType]-[LxW][Unit]-[UniqueID]

SubType	Meaning
PP	Pre-Printed
TH	Blank Thermal
LA	Blank Laser

Example: PKG-LBL-TH-10x5CM-SA0505

Pallet

PKG-PAL-[SubType]-[LxWxH][Unit]-[UniqueID]

SubType	Meaning
WD	Wood
RE	Recycled
PL	Plastic
MT	Metal

Example: PKG-PAL-WD-120x100x15CM-SA0506

Tape / Banding

PKG-[TP or BA]-[Width][Unit]-[UniqueID]

Example: PKG-TP-5CM-SA0507

---

ACC- — Accessories

ID Pool: AAxxxx starting at AA0501

ADA Boxes

ACC-ADA-[Switches+Location]-[Speaker (Optional)]-[CustomerCode (Optional)]-[UniqueID (Optional)]/[Color]

Switch location: count + location — 1i (1 interior), 1e (1 exterior), 2e (2 exterior) Speaker suffix: -SPK if speaker built in. Customer code: 4-letter code for customer-specific builds — e.g., COMT (Community Transit), CAPM (CapMetro).

Example: ACC-ADA-1e-SPK-COMT-AA0501/POL

IOT Boards (GPIO / Normally Open Switch Ports)

ACC-IOT-[NumberOfPorts]-[UniqueID (Optional)]

Example: ACC-IOT-16-AA0502

Audio

ACC-AUD-[SubType]-[Descriptor (Optional)]-[UniqueID]

SubType	Meaning
Mix	Mixer
Amp	Amplifier
Spk	Speaker
MIC	Microphone

MIC qualifier format: [Interface]-[MountType]-[Location]

• Interface: USB, XLR, 3.5MM
• Mount type: BHD (Bulkhead), FLS (Flush), STD (Standard)
• Location: EX (Exterior/Outdoor), IX (Interior)

Descriptor examples for other sub-types: 5In, 160Wx2, 3Ch

Examples:

• ACC-AUD-Amp-160Wx2-AA0501
• ACC-AUD-MIC-USB-BHD-EX-AA0502
• ACC-AUD-Spk-5In-AA0503

Network

ACC-NET-[Location]-[SubType]-[UniqueID]

Location codes: I (Indoor), EX (Outdoor), M (Mobile). Append DIN to location if DIN rail mountable.

SubType	Meaning
SW	Switch
RTR	Router
WI	Wireless

Example: ACC-NET-EXDIN-SW-AA0504

Video

ACC-VID-[SubType]-[UniqueID]

SubType	Meaning
HD	HDMI
SD	SDI
MON	Monitor
MISC	Miscellaneous

Example: ACC-VID-HD-AA0505

Solar — Panel

ACC-SLR-PNL-[Watts]-[UniqueID]

Example: ACC-SLR-PNL-100W-AA0506

Solar — Battery

ACC-SLR-BAT-[Volts+AH]-[Identifier (Optional)]-[UniqueID]

Example: ACC-SLR-BAT-12V100AH-LT-AA0507

Antenna

ACC-ANT-[SubType]-[UniqueID]

Sub-types can be combined for multi-band: 4GGPS, WI4G, etc.

SubType	Meaning
WI	WiFi
4G	LTE/4G
GPS	GNSS/GPS

Example: ACC-ANT-4GGPS-AA0508

Vandalism / Protective Covers

ACC-VAN-[SubType]-[DisplayModel (Optional)]-[UniqueID]

SubType	Meaning
CVG	Cover Glass
CVP	Cover Polycarbonate
FL1	Single Layer Film
FL2	Double Layer Film
FL5	5-Layer Film

Example: ACC-VAN-CVP-EX43v-AA0509

Memory / Storage

ACC-MEM-[MediaType]-[Size]-[UniqueID]

MediaType	Meaning
SD	SD Card
USB	USB Drive
CF	CompactFlash
M2	M.2 SSD
SATA	SATA Drive

Size format: 128G, 256G, 1T

Example: ACC-MEM-SD-128G-AA0510

---

PRT- — Components / Parts

ID Pool: PAxxxx starting at PA0501

LCD Panel

PRT-LCD-[Size]-[SubType]-[FactoryCode (Optional)]-[UniqueID]

Size: diagonal with unit — 43in, 37in, 26.8in SubType: functional family descriptor — EX43v, Msw, MRsw

Rule: The D in EXD is a marketing term. Use EX + size + flags for functional sub-type coding (e.g., EX43v not EXD43k).

Example: PRT-LCD-43in-EX43v-PA0501

Power Supply / Circuit Breaker

PRT-PWR-[PS or CB]-[Rating]-[DIN (Optional)]-[UniqueID]

Power Supply rating format: OutputVolts+Watts — 24V350W, 12V200W

IP Rating flag: -IP67, -IP65, etc. — optional, placed after the rating, before UniqueID. Used for outdoor / waterproof PSUs.

Circuit Breaker rating format: Volts+Amps-SP or DP

• SP = Single Pole, DP = Double Pole
• Example rating: 120V20A-DP

DIN flag: -DIN if rail mountable (placed before UniqueID).

Examples:

• PRT-PWR-PS-24V350W-PA0502 — 24V 350W PSU, no DIN
• PRT-PWR-PS-24V60W-IP67-PA0527 — 24V 60W PSU, IP67 waterproof (outdoor LED driver)
• PRT-PWR-CB-120V20A-DP-DIN-PA0503 — 120V 20A double-pole DIN-rail breaker

Power — Misc Components

PRT-PWR-[SubType]-[DIN (Optional)]-[UniqueID]

SubType	Meaning
TF	Transformer
FUS	Fuse or Fuse Holder
SP	Surge Protector
TS#	Terminal Strip (e.g., TS6)
CON	Connector
BLO	Block
MISC	Miscellaneous

Note: Relays (RLY) have a dedicated section — see PRT-RLY below. EMI power line filters have a dedicated section — see PRT-PWR-EMI below.

When a misc component has a known manufacturer model identifier, append it before the UniqueID: PRT-PWR-SP-DIN-YSPD40C-PA0522.

Example: PRT-PWR-SP-DIN-PA0504

Power — EMI Filter

PRT-PWR-EMI-[Amps]-[Model (Optional)]-[UniqueID]

Amps: rated current — 20A, 10A, 30A Model: manufacturer model family identifier, optional — CW4L2

Example: PRT-PWR-EMI-20A-CW4L2-PA0521 — 20A EMI power line filter, CW4L2 series

---

Mainboard

PRT-MB-[BoardCode]-[Processor]-[UniqueID]

Board Code is a two-character code: first letter = manufacturer, second letter = model within that manufacturer's line (A, B, C…). This deliberately abstracts the OEM vendor from public-facing part numbers.

Manufacturer Letter Codes:

Letter	Manufacturer
A	SMDT (Shenzhen Smart Device Technology)
B	Sunchip
C	Liontron
D	Vtek (Hummax)
E	Marvel (Unknown Manufacturer)
F	Z Series — Xinhua / ChipChina
G	Onyx (E-Ink)
X	Miscellaneous / Retired

Known Board Codes (partial list):

Code	Manufacturer	Board Model	Chipset
AA	SMDT	IoT-3288A	RK3288
AB	SMDT	IoT-3399E V2	RK3399
AC	SMDT	IoT-3399E V3	RK3399
AD	SMDT	IoT-3399E V4	RK3399
AE	SMDT	IoT-3588E	RK3588
AF	SMDT	IoT-3568A	RK3568
BA	Sunchip	C33p V1.1	RK3568
BB	Sunchip	AD-B02 V1.1	RK3288
BC	Sunchip	AD-B03 V1.3	RK3399
BD	Sunchip	AD-B03 V1.5	RK3399
CA	Liontron	K4 3399 V11.0	RK3399
CB	Liontron	H 3399 V2.0	RK3399
CD	Liontron	M3 3288 V6.0	RK3288
CE	Liontron	H 3566 V3.0	RK3566
CF	Liontron	K 3566	RK3566
CG	Liontron	D 3568	RK3568
CH	Liontron	D 3588	RK3588
DA	Vtek	SX370	RK3288
DB	Vtek	SX390	RK3399
EA	Marvel	R15 v2.0	RK3288
EB	Marvel	R15 v2.1	RK3288
EC	Marvel	R15 v2.2	RK3288
FA	ChipChina	ZK-R32D V3.0	RK3288
GA	Onyx	Max Lumi	Qualcomm
GB	Onyx	Max 3	Qualcomm
GC	Onyx	Tab X	Qualcomm
XA	Misc	ZC-328	RK3288

Supported Processor Codes: 3288, 3299, 3368, 3388, 3399, 3566, 3568, 3576, 3576s, 3588, 3588s

Example: PRT-MB-CE-3566-PA0505 — Liontron H-3566 board with RK3566 processor

Specialty Boards

PRT-[Type]-[MfgModel (Optional)]-[UniqueID]

Type	Meaning
RM	Remote Monitoring Board (sometimes called "Docking Board" by OEMs)
CB	Call Board
MDM	Modem
GPS	GPS Board
SDI	SDI Board
PC	Power Converter Board

Known RM models: MC30 (YH-MC30, used in TC-Kiosk / TCK displays), MC10 (YH-MC10-V1.0, used in Infocabinet / IC displays). The model identifier is always included for RM boards to disambiguate controller variants.

Examples:

• PRT-RM-MC30-PA0502 — Remote monitoring board for TCK displays
• PRT-RM-MC10-PA0519 — Remote monitoring board for IC (Infocabinet) displays

TCON Board (Timing Controller)

PRT-TCN-[PanelModel]-[UniqueID]

Rule: TCON boards belong to specific panel models. The panel model descriptor is always included as the third element. Use the same functional sub-type as the PRT-LCD entry for that panel (e.g., EX43v).

Example: PRT-TCN-EX43v-PA0507

AD Board (Signal Processor)

PRT-AD-[Inputs]/[Outputs]-[UniqueID]

Note: "AD Board" is a legacy name. These are now generally digital-to-digital signal processors (formerly Analog/Digital). They translate display input signals to panel interface protocols.

Input codes (use number prefix if more than one of the same type):

• H = HDMI, S = SDI, D = DVI, V = VGA

Output codes:

• L = LVDS, E = EDP, V = VbyOne

Multiple inputs of same type use a number prefix: H2 = 2× HDMI inputs.

Examples:

• PRT-AD-H/L-PA0508 — 1× HDMI in, LVDS out
• PRT-AD-H2S/E-PA0509 — 2× HDMI + 1× SDI in, EDP out

Backlight Board (LED Driver)

PRT-BKL-[PanelModel (Optional)]-[UniqueID]

Example: PRT-BKL-EX43v-PA0510

LED Components

PRT-LED-[SubType]-[...]-[UniqueID]

LED Module (LM):

PRT-LED-LM-[DotPitch]-[LxWcm]-[EX or IX]-[Generation]-[UniqueID]

• DotPitch: P2.5, P3.75, P1.9, etc.
• Dims: width × height in CM — 20x11
• Location: EX (outdoor), IX (indoor)
• Generation: G1, G2, etc.

Example: PRT-LED-LM-P2.5-20x11-EX-G2-PA0511

Camera

PRT-CAM-[SubType]-[UniqueID]

SubType	Meaning
USB	USB Camera
MIPI	MIPI Camera
POE	PoE Camera
ETH	Ethernet Camera
WIFI	WiFi Camera

Example: PRT-CAM-POE-PA0512

Environmental — Sensors / Controllers

PRT-ENV-[SubType]-[UniqueID]

SubType	Meaning
SEN	Sensor (general/unspecified)
FC	Fan Controller
TEM	Temperature Monitor

Individual sensor type codes — use as the third segment when specifying a single sensor type:

Code	Meaning
TMP	Temperature
LUM	Luminance / Light Level
HUM	Humidity
SHO	Shock
DOR	Door
TLT	Tilt
FLD	Flood

Pattern for typed sensors:

PRT-ENV-SEN-[SensorType]-[UniqueID]

Model identifiers are omitted when the sensor type is used across multiple builds with varying part numbers and is not model-tracked at the SKU level. In those cases, the UniqueID alone is sufficient to identify the line item.

Examples:

• PRT-ENV-SEN-TMP-PA0525 — Temperature sensor (model not tracked)
• PRT-ENV-SEN-LUM-PA0526 — Luminance sensor (model not tracked)

Environmental — Fan

PRT-ENV-FAN-[Voltage]-[LxWxH][Unit]-[UniqueID]

Dimensions use MM notation. For square fans, all three dimensions are stated (LxWxH).

Example: PRT-ENV-FAN-12VDC-80x80x38MM-PA0515 — 80×80×38MM 12VDC brushless ball bearing fan

Environmental — Fan Connector PCB

PRT-ENV-PCB-FAN-[UniqueID]

Used for the PCB connector boards (PCB1/PCB2) that interface between fan wiring harnesses and the control board. Separate from the fan itself.

Example: PRT-ENV-PCB-FAN-PA0524

Environmental — Heater

PRT-ENV-HTR-[Volts+Watts]-[UniqueID]

Example: PRT-ENV-HTR-110V150W-PA0515

Air Filter

PRT-FLT-[LxWxH][Unit]-[FactoryCode (Optional)]-[UniqueID]

Example: PRT-FLT-535x170x25MM-H23081-PA0511

---

Relay

PRT-RLY-[Voltage]-[ContactType]-[UniqueID]

Voltage: coil operating voltage — 12VDC, 24VDC, 5VDC ContactType: contact configuration — SPST, SPDT, DPST, DPDT

Note: Use PRT-RLY for standalone relay components. PRT-PWR-RLY (in the PWR misc section) is reserved for relay assemblies integrated within a power panel module.

Example: PRT-RLY-12VDC-SPST-PA0523

---

IOT Switch Interface Board

PRT-IOT-SW-[Ports]-[UniqueID]

Ports: number of switch input ports (integer) — 8, 16

Used for ADA switch interface boards and HID encoder boards integrated into the display assembly (e.g., the HID XM-08 encoder for Community Transit ADA compliance).

Distinct from ACC-IOT — ACC-IOT classifies GPIO boards ordered as accessories. PRT-IOT-SW is a component-level board that is part of the display build.

Example: PRT-IOT-SW-16-PA0520 — 16-port ADA switch interface / HID encoder board

---

Switch / Button

PRT-SW-[SubType]-[Dims]-[ButtonColor (Optional)]-[UniqueID]

Dims: LxWmm or DIAMxDEPTHmm ButtonColor (switch actuator color, not labeling color): RED, BLU, GRN, YEL, ORG

SubType	Meaning
BLA	Blank
RNG	Light Ring
ARW	Arrow
ADA	Handicap Symbol
ES	Spanish Language
HOM	HOME
TOG	Toggle
MISC	Miscellaneous

Example: PRT-SW-RNG-32Dx14mm-BLU-PA0517

---

FAB- — Fabricated Parts & Materials

ID Pool: FAxxxx starting at FA0501

Enclosure Parts

FAB-ENC-PRT-[Type]-[DisplayModel (Optional)]-[UniqueID]/[Color]

Type	Meaning
DR	Door
CV	Cover / Vent Cover
GL	Glass / Transparent Panel
LK	Lock
PNL	Panel

Note on display model: Use functional descriptor (e.g., EX43v) not marketing name (EXD43k). Model is optional — omit when the part applies to multiple displays.

GL — LED variant: When the glass covers a LED panel rather than an LCD, use LED as the display model and append dimensions (LxW in CM) before the client suffix:

FAB-ENC-PRT-GL-LED-[LxWxCM]-[CustomerCode/Variant (Optional)]-[UniqueID]

Example: FAB-ENC-PRT-GL-LED-140x77CM-COMT/TCK-FA0511 — 140×77CM LED cover glass, Community Transit TC-Kiosk

LK — Lock style qualifier (optional): When multiple lock styles are used in the same BOM, a style qualifier may be appended after LK to disambiguate:

• LK-TRI — Triangle / cam tensioning lock (keyed, enclosure security)
• LK-WNG — Wing lock (tool-free quarter-turn, poster box / panel access)

Existing assignments without style qualifier remain valid; qualifier is only required when disambiguation is needed.

Examples:

• FAB-ENC-PRT-DR-EX43v-FA0501/BLK — door assembly for EX43v
• FAB-ENC-PRT-CV-EX43v-FA0502 — vent cover for EX43v
• FAB-ENC-PRT-LK-FA0504 — triangle tensioning lock
• FAB-ENC-PRT-LK-FA0510 — wing lock, poster box

LED Modular Frame Parts

FAB-ENC-LM-[Type]-[UniqueID]

Used for individual replacement parts within an LED modular enclosure frame. Type uses the same codes as FAB-ENC-PRT.

Example: FAB-ENC-LM-PNL-FA0504 — LED modular enclosure bottom panel replacement

Finished Parts / Brackets

FAB-[Type]-[Process]-[STD or CUS]-[UniqueID]/[Color]

Type	Meaning
PRT	Part
BRK	Bracket
LM	LED Modular Frame
MISC	Miscellaneous

Process	Meaning
3D	3D Printed
CNC	CNC Machined
PLT	Sheet Metal Bent/Cut
PIP	Pipe

Example: FAB-BRK-PLT-STD-FA0505/BLK

Raw Materials

FAB-MAT-[SubType]-[Material]-[Dims]-[UniqueID]

SubType	Meaning
PLT	Plate
SQT	Square Tube
PIP	Pipe
EXT	Extrusion
POW	Powder Coat Material (raw, pre-application)
FIL	3D Print Filament

Material	Meaning
AL	Aluminum
CS	Carbon Steel
SS	Stainless Steel
ABS	ABS Plastic
PC	Polycarbonate

Example: FAB-MAT-PLT-AL-3x48x96IN-FA0506

Extrusion Hardware

FAB-EXT-[SubType]-[RailSize]-[Material]-[UniqueID]

SubType	Meaning
CB	Corner Brace
TN	T-Nut
IB	Inner Brace
JN	Joiner
EC	End Cap
MISC	Miscellaneous

Example: FAB-EXT-TN-30x6-ZIN-FA0507

---

FST- — Fasteners

ID Pool: TAxxxx starting at TA0501

Pattern:

FST-[Type]-[DiameterxThread]-[xLength (Optional)]-[Material]-[UniqueID]

Type	Meaning
HBL	Hex Bolt
FBL	Flange Bolt
SHD	Socket Head
HHD	Hex Head
SHX	Security Hex
TRX	Torx Head
STX	Security Torx
HXN	Hex Nut
FLN	Flange Nut
GSC	Grub Screw
ATH	All Thread
FLW	Flat Washer
FNW	Fender Washer
SPW	Split Washer
SPEC	Specialty
MISC	Miscellaneous

Material	Meaning
BLO	Black Oxide
SS	Stainless Steel
ZIN	Zinc Plated
YZI	Yellow Zinc (Iridite)
ALU	Aluminum
ABS	ABS Plastic
CL10	Class/Grade 10 hardness designation

Examples:

• FST-SHD-M6-1.0-x25mm-SS-TA0501
• FST-FLW-1/4-ZIN-TA0502

---

Quick Decode Guide

1. Read the prefix before the first - to identify the category. If it starts with KIT-, read the second segment as the child prefix.
2. For MPTV- and MP-: parse left to right — family, size, flags, generation/customer, color.
3. For all other prefixes: the last segment (before any /Color) is always the Unique ID.
4. Use the sub-type code (second or third segment) to determine which grammar row applies.
5. For PRT-MB-: first two chars of second segment = manufacturer code, next char(s) = board revision. Third segment = processor chipset.
6. For PRT-AD-: the / in the middle separates input codes (left) from output codes (right).
7. Color suffix, if present, follows the Unique ID as /BLK, /DGR, /SIL, or /POL.

---

Known Corrections from Sheet v1.0 → v1.1

Row	Prefix	Issue	Fix
9	CBL-	Length appeared after UniqueID	Moved Length before UniqueID
17	ACC-ADA	UniqueID appeared after /Color	Moved UniqueID before /Color
26	PRT-PWR-PS	-DIN appeared after UniqueID	Moved -DIN before UniqueID
27	PRT-PWR misc	-DIN appeared after UniqueID	Moved -DIN before UniqueID

Schema Additions in v1.2

• /POL color code added (Polished Stainless Steel)
• KIT- prefix rules formalized
• MP- TypeSuffix L (LED) documented; family list expanded
• PRT-MB board code system fully documented with manufacturer letter table and known board codes
• PRT-MB processor code list expanded: added 3299, 3368, 3399, 3568, 3576, 3576s, 3588s
• PRT-TCN added with rule: panel model required as third element
• PRT-AD added with input/output encoding using / separator
• PRT-BKL added for backlight/LED driver boards
• PRT-LED-LM added for LED modules
• PRT-PWR-CB rating format corrected: now Volts+Amps-SP/DP (not Volts+Watts)
• FAB-ENC sub-section added for enclosure parts (DR, CV, GL, LK, PNL)
• FAB-ENC-LM added for LED modular enclosure parts
• FAB-LM added as FAB type for LED Modular Frames
• ACC-AUD-MIC added with interface/mount/location qualifier pattern
• ACC-VAN added for vandalism/protective covers (CVG, CVP, FL1, FL2, FL5)
• ACC-MEM added for memory/storage (SD, USB, CF, M2, SATA)
• ACC-ADA updated: customer code (4-letter) added as optional element before UniqueID
• EXD marketing name note added — use functional descriptor in part numbers
• PRT-ENV-SEN individual sensor type codes documented; kit rule added

Schema Additions in v1.4

• PRT-PWR-PS updated: IP rating flag added — optional -IP67 / -IP65 element after rating, before UniqueID, for outdoor/waterproof power supplies; example added (PRT-PWR-PS-24V60W-IP67-PA0527)
• PRT-ENV-FAN example corrected: dimensions use MM notation, not CM (80x80x38MM); note added that all three dimensions are always stated for square fans
• FAB-ENC-PRT-GL updated: LED glass variant documented — use LED as display model, append LxWxCM dimensions, then client suffix before UniqueID; example added (FAB-ENC-PRT-GL-LED-140x77CM-COMT/TCK-FA0511)
• FAB-ENC-PRT-LK updated: optional lock style qualifier documented — LK-TRI (triangle/cam tensioning) and LK-WNG (wing lock, tool-free); existing assignments without qualifier remain valid

Schema Additions in v1.3

• Global Rule #7 added: Client-specific suffix — [CustomerCode]/[Variant] inserted before UniqueID for customer- or sub-model-specific builds (e.g., COMT/TCK)
• PRT-RM updated: documented MC30 (TCK displays) vs MC10 (IC Infocabinet displays) as known model identifiers; both examples added
• PRT-PWR-EMI added: EMI power line filter — PRT-PWR-EMI-[Amps]-[Model]-[UniqueID]
• PRT-PWR misc table updated: RLY removed (moved to dedicated PRT-RLY section); note added that model identifiers can be appended for identifiable components; SP example updated
• PRT-RLY added: standalone relay — PRT-RLY-[Voltage]-[ContactType]-[UniqueID]; distinct from PRT-PWR-RLY
• PRT-ENV-SEN updated: LUM (Luminance) added to sensor type code table; pattern updated to PRT-ENV-SEN-[SensorType]-[UniqueID]; KIT-PRT-SEN guidance replaced with note that model identifiers are omitted when parts vary per build
• PRT-ENV-PCB-FAN added: fan connector PCB — PRT-ENV-PCB-FAN-[UniqueID]
• PRT-IOT-SW added: IOT switch interface / HID encoder board — PRT-IOT-SW-[Ports]-[UniqueID]; distinction from ACC-IOT documented
• PRT-FLT example updated with real-world part number format (factory code + MM dimensions)